TeamGroup

TeamGroup T-Force Vulcan 32GB DDR5-6000 CL38

Ranked #7 in RAM

464 LP on the category ladder what's LP?

A low-profile, low-voltage 6000 MT/s kit that did well on AMD in tests of its Vulcanα sibling. It trailed on Intel, overclocked only averagely, and its CL38 timings are looser than the CL30 kits it competes with.

Consolidated from 2 independent outlets

See the sources

Flagged as a product to avoid

2 of 7 research runs entered this as a product to avoid rather than a pick.

Worst latency among DDR5-6000 kits, and its RGB design adds no performance benefit.
Flagged 13 September 2026

1 earlier flag predates the point where runs began recording their reasoning, so its grounds were never written down.

Why the boards include products to avoid

Check price

About this product

This page covers the TeamGroup T-Force Vulcan DDR5 FLBD532G6000HC38ADC01, a 32GB desktop memory kit made of two 16GB sticks with a black stamped aluminum heat spreader and no RGB lighting. It is rated for 6000MHz at CL38 and a low 1.25V once you enable its memory profile in the BIOS. Until then it runs at the standard JEDEC speed.

TeamGroup lists both Intel XMP 3.0 and AMD EXPO support for the Vulcan DDR5 line and rates this part for Intel 700 and 800 series and AMD 600 and 800 series motherboards. At 32.7mm tall it is a low-profile kit that clears large air coolers. It suits a mainstream Ryzen build that wants 6000 MT/s in a compact, low-voltage kit.

No outlet we found tested this exact part. Tom's Hardware, Guru3D and KitGuru tested the AMD-only sibling, the T-Force Vulcanα FLABD532G6000HC38ADC01, which TeamGroup lists at the same 32GB, 6000MHz, CL38 and 1.25V with the same 32.7mm height. Tom's Hardware says the two lines look identical apart from the α on the heat spreader, so their results are the closest guide to this kit.

Specifications

Part number: FLBD532G6000HC38ADC01 1
Capacity: 32GB(2x16GB) 1
Memory type: DDR5 1
Rated speed: 6000MHz 1
CAS latency: CL38 1
Voltage: 1.25V 1
Bandwidth: 48000 MB/s 1
Profiles: Intel XMP3.0 / AMD EXPO 1
Dimensions: 32.7(H) x 140(L) x 7.5(W)mm 1
Warranty: Lifetime warranty 1

Checked by hand in September 2026 against 5 sources

Pros & cons

✓ The Vulcanα sibling placed second in Tom's Hardware's AMD application tests, behind only a CL30 kit
✓ The Vulcanα sibling topped KitGuru's 7-Zip and 3DMark CPU charts on a Ryzen 7 7700X
✓ Low 32.7mm height clears the largest air coolers
✓ Rated at a low 1.25V
✓ Lifetime warranty

✗ Weak on Intel: the Vulcanα sibling sat in the bottom half of Tom's Hardware's Intel application tests
✗ An average overclocker: Tom's Hardware needed 1.4V to reach DDR5-6400 on the Vulcanα
✗ CL38 timings are looser than the CL30 kits sold at the same 6000 MT/s
✗ No RGB lighting, if you want it
✗ TeamGroup sells several 32GB 6000MHz CL38 Vulcan parts at 1.25V and 1.35V, plus the AMD-only Vulcanα, so check the part number before you buy

The sources behind this ranking

We searched the web and YouTube for what has been published about this product, then read the articles, video transcripts and comments we found.

2 positive sources

Guru3D Article

Overall, the TeamGroup TForce Vulcanα DDR5 memory kit is a good option for those looking for high-enough performance memory with decent latency for AMD systems.

Read T

Tom's Hardware Article

TeamGroup's T-Force Vulcanα DDR5-6000 C38 is definitely in the conversation regarding fast DDR5-6000 memory kits for Ryzen 7000 chips.

Read

Frequently asked questions

It ranks #7 of 15 on our RAM tier list, in C tier. That placement draws on 2 independent outlets.

The Vulcanα is TeamGroup's AMD-only line. Its FLABD532G6000HC38ADC01 kit carries an AMD EXPO profile and is listed for AMD 600 and 800 series boards. This plain Vulcan part, FLBD532G6000HC38ADC01, lists both Intel XMP 3.0 and AMD EXPO and Intel 700 and 800 series boards as well. Both are rated 6000MHz CL38 at 1.25V and stand 32.7mm tall, and Tom's Hardware says only the α on the heat spreader tells them apart.

Less than the numbers suggest, going by tests of the Vulcanα. It came second only to a CL30 Corsair kit in Tom's Hardware's AMD application tests, and KitGuru found it competing with memory that looks faster on paper. Tom's Hardware saw weaker results on Intel.

Very likely. TeamGroup lists the modules at 32.7mm tall, and Tom's Hardware says you can fit the most oversized CPU air coolers over the matching Vulcanα without trouble.

Yes. TeamGroup says XMP 3.0 or EXPO must be enabled by hand, and until you do the kit runs at the JEDEC default, such as DDR5-4800 or lower. TeamGroup also recommends updating your motherboard BIOS before installing the memory.

A little. Tom's Hardware reached DDR5-6400 on the Vulcanα but had to raise the voltage from 1.25V to 1.4V, and called it an average overclocker. TeamGroup warns that running beyond the official speed, voltage or timings may affect warranty coverage.